Quantity in Basket: none
Code: 30012
Price:
$27.95
Shipping Weight: 0.00
Ghost Glow
Kit ™
Included:3 Bright Sights® -High visibility gun sight coatings Green, Orange, and Yellow
3 Ghost Glow™ - Light activated luminescent gun sight coatings, Yellow, Orange, Green
1 Application Stick
1 Application Brush
1 Full color brochure and instructions
Packaged in a neat durable storage case
About the Ghost Glow Kit™
This
kit gives the shooter the benefit of having both types of coatings
to use.
Both light activated luminescent coatings and the high visibility
coatings are designed and
manufactured to provide a tough durable coating system which will
stay on the firearm sights
under tough conditions. Bright Sights.Inc coatings will tolerate the
extreme heat of rapid fire.
You
can quickly and easily create the appropriate sighting system with
this versatile kit.
The
Ghost Glow coatings are designed as a light activated luminescent
high visibility gun sight coating.
The coating must be charged with light to glow in the dark. The light
source can be sunlight, light bulb
or even a flashlight. The duration and intensity of light exposure
will determine the glow effect.
Ghost Glow coatings
are not designed to be used alone but as an enhancement
to Bright Sights high visibility gun sight coatings.
Best results are achieved by combining the two different coatings
of the same color
A small amount of each coating should be mixed outside of each colored
vial.
The mixing ratio recommended is 75% Ghost Glow and 25% High Visibility
Gun Sight Coating.
Coating Application Instructions
1 Remove all gun oil
from sights with Bright Sights Gun Sight Cleaner *
Sold separately here*
repeat process and then dry thoroughly using clean soft
cloth. 2 Shake coating vial well. 3a Dot Sights - Take the small Bright Sights Applicator
and dip into coating vial,
place a small amount of coating on the tip of the applicator
stick and gentle place
a small amount of coating onto the gun sight to form a small
dot. Repeat process to increase dot size 3b Bead, Blade or Ramp gun sights - Take a small
amount of coating by carefully dipping the
Bright Sights Brush in the vial. Gently apply the first
coating to the sights and repeat process.
Several small layers of coating is better than one layer
of coating.
Combining the Bright Sights® High Visibility coatings
and the Ghost Glow™ coatings, we suggest
mixing them on a small piece of plastic or paper outside
of each vial prior to application. Once the
coatings are combined, eg : Bright Sights Green with Ghost
Glow Green then the same application
process will apply to the mixed coating. 4 Close container/vial do not let the product dry
in the bottle. 5 Clean up using a damp cloth. 6 Allow your gun sights several hours to dry prior
to using the firearm. Full cure requires 48 hours.
