Instruction

Non Toxic
Non Flammable
100% Guaranteed

1 Remove all gun oil from your sights using BRIGHT SIGHTS Cleaner or alcohol on a cotton swab or rag.

Wipe dry and let stand for a few minutes.

2 Shake container to mix the paint

3 If you have dot sights, take a flat toothpick or BRIGHT SIGHTS Applicator and dip it into the paint, putting a small amount on just the end. Carefully place this drop of paint on your gun sight. Repeat to make the dot larger.

4 If you have a bead, blade, or ramp sight, use BRIGHT SIGHTS Brush or a small artist brush.

5 *NOTE* Several small layers are better than one thick layer.

6 CLOSE THE CONTAINER! Don't let the paint dry out!

7 Clean up using a damp rag.

8 Allow your sights to dry for several hours. *Full cure requires 48 hours*